Actually, let's be honest here, they are most likely the worst Toyota ever built.
These are my top 10 reasons for hating the mk3 supra. How do I know them so well? I worked on them for nearly 2 years, I drove both RHD and LHD mk3's with all sorts of different engines, stock and modified. I've spent a lot of time wrenching on them, and man do they suck badly. Let's begin:
10. Racing History: Let's be honest, there's really nothing special here, Bjorn Waldergard won one event with the MK3 supra in a Beijing Rally, and a few British fellows ran it in BTCC for a while. No real pedigree here.
9. Steering Angle: This is straight up a joke, it can't be real, no way it's even considered safe or functional to have so little steering lock for daily use. You think I'm kidding, but that's full lock below.
8. Weight: This really should be the #1 reason why there's no point in driving an mk3 Supra for any sort of 'sporting' purposes. What's that? you've never known what the weight of a mk3 supra was? Pictured below is a vehicle that weighs nearly identical, and actually produces more power.
(Note: 3800lbs, that's right, the CK short bed, short cab, not only weighed 3800lbs, but it actually produced 230hp and 300ft/lb of torque. Although the 1JZ variant is comparable)
7. Aftermarket Styling: Yes it's a slick looking exterior, simply put, it's the only selling point of the car. However, the aftermarket stuff? yeah, look below...
6.Targa Top: So you have an oval, pretty strong shape, egg's are 3d ovals and resist deformation pretty well. Then you cut a huge chunk out of it. Now you've got an easily crushable "C" shape. Thus is the Targa roof. How bad is it for chassis flex? Toyota actually had high grade, long threaded allen bolts to hold it square when in. When out, people started putting in targa supports to help reduce the horrible flex.
5. Steering Stablizer: The whole Geometry of the MK3 Supra suspension is fucked, and to help reduce bump steer, and ultimately any sort of driver feedback that's left after the hefty power steering, was a shock, bolted to the steering rack to help reduce...something. Road feel mostly, or resist the horrible bumper steer associated with #4. This Stablizer, much like the Cressidas (Although they had different front suspensions and shared the rear) resists and sometimes completely removes the affects of caster during cornering. It reduces the speed of turn by adding a dramatic amount of resistance.
4.Suspension Dynamics: These are just plain FUCKED. For some reason, Toyota decided that going from a single lower control arm McPherson strut setup, that had proven extremely well in the Corolla's, Celica's, and Celica Supras of the past, had to go, and in place a needlessly complex, and albeit poorly designed multi-link/double wishbone setup in it's place. You want to know how bad it is? Camber actually becomes positive on compression and negative on extension. Seriously look vvv.
3. Cock Riders: This isn't about the owners. The amount of people floating around the internet praising the mk3, simply because of it's loose relation to that of an mk4 Supra most of them having never owned a Supra in their lives. Although this makes me curious of the dynamic of buying and polishing a turd.
2. 7M/1G: Pretty weak sauce. So you buy a 3800lb driveway ornament and want to go fast. In North America, your faced with the 7M, and Japan, luckily enough got the 1jz, however, they too got the 7M and even worse, the 1G. Every other M series engine was decent, the 7M screwed that right up. It's head design is the fault. People will tell you it was a bad factory gasket, or under torqued bolts. However, even with those factors coverd, the real core of the issue was a bad head design. Getting past the common, and often debilitating issue of 7m's blowing gaskets (try pushing that thing!) The power of a 7m is a joke. Remember that Toyota publishes not the wheel horse power, but the crank. By the time that inline 6 delivers it's 200hp N/a to the rear, it's about 160hp, got a turbo? Roughly 190hp. Brutal for that amount of weight, but look out! There's even a worse motor: the 1GGTE. Although not plagued with head gasket failures and people thinking they can build the ultimate 7m, only to fail like the next guy, the 1ggte had it's own issues, spinning bearings, and well, being 2 liters! Such a tiny inline 6, and it needed twin turbo's just to make the 210hp. Unless your supra screwed and end up with an n/a 1GGE at 150hp.
And the Number 1 reason MK3 supra's are garbage! *Drum Roll*
.
.
.
.
.
.
.
.
.
1. Burgandy:
Share this post
Back to SPEED HERO Blog
who ever took the time to do this is a fucking loser nd should suck a dick
To the writer, one thing for sure, you must really suck at fixing your own car, that is why it always shits on you. Second and for most, as the head issues goes, yes its hard to make power, but new mhg and arp studs torque them down to 85 or 90, your good for 600hp easy. I had my 7m pushing 450 to 500 easy depending on my boost. Built bottom block, stock head. And for the suspension goes, I really don’t know wtf you’re talking about, its legit. If you lower your car to low, of course its going to butterfly on stock suspension, unless you buy cambers. 3rd, people have their own preference on mk1, mk2, mk3, and mk4. You can’t compare supra to alltrac, cause by the looks of it, the alltrac kills any supra on course or drag, stock verse stock. 3rd gen runs mid to low 12’s while the mk4 supra runs low to high 13’s. So the mk4 supra engine is shit to then right, wrong. Any car is good until some idiot that doesn’t know what they are doing decides to touch it and fucks it up, and come here and make a bullshit tread like this.
Fogot one thing, you are right about the burgundy interior, it looks like crap, maybe the only downfall, w/bhg. I love my 91 on 18’s with shadow grey interior.
lol, Had doesn’t mean it still works.
As for metal head gaskets and ARP studs. They fail too, We constantly had customers comes to us even after having done these modifications to their motors, either them selves or at the shop, still with failures.
You might want to take a few minutes to read up on suspension dynamics before declaring that gaining positive camber on compression is normal.
No comment on the fact that the diameter of the rim seems more important to you than the width and offset.
lmfao you know whats good Quinn ill back you on this, mk3 supra’s are garbage the only reason people buy these is because it says SUPRA and TURBO on the back of them